Serving commercial aquatic facilities across New York State.

Talk With Angelo

E-Z Clor · Specialty Chemicals and Site Disinfection · Water balancers

E-Z Clor Balancers

E-Z Clor balancers for alkalinity, pH, calcium hardness, and cyanuric acid (stabilizer)

Request a Facility AssessmentTalk to a Water-Quality Specialist
← Back to all productsAvailable through FreyTechFacts summarized from manufacturer literature 2026-09-26; confirm details with FreyTech before specifying.

Overview

E-Z Clor states that properly balanced water "prevents corrosion and staining" and optimizes sanitizer performance. The balancer line covers the four standard adjustments: total alkalinity, pH (up and down), calcium hardness, and stabilizer (cyanuric acid).

Alkalinity Up, pH Up, pH Down, and Calcium Elevator are all granular products; pH Down is described as a dry acid that lowers pH more conveniently than liquid acid. Clor Save (granular) and Liquid Clor Save raise stabilizer (CYA) to reduce chlorine loss to sunlight. The site does not state the chemical identity or percentage of any balancer's active ingredient; those figures are available only in the linked SDS PDFs, which were not read for this record.

Is this a fit for your facility?

Usually a fit when

  • Routine adjustment of total alkalinity, pH, and calcium hardness
  • Raising cyanuric acid where the pool relies on stabilized chlorine and outdoor UV loss is a concern
  • Operators who prefer dry acid over liquid muriatic acid for pH reduction

Ideal facilities and conditions: Total alkalinity and pH correction; Calcium hardness correction on fill or after dilution; Stabilizer (CYA) build-up at season start.

Problems it addresses

Key capabilities and benefits

Capabilities

  • Alkalinity Up: granular; raises total alkalinity and buffers against pH bounce; 5, 10, 25 lb
  • pH Up: granular; raises pH with minimal effect on total alkalinity (per manufacturer); 2, 5, 10, 25 lb
  • pH Down: granular dry acid; lowers pH and helps prevent scale; 2.5 and 6 lb
  • Calcium Elevator: granular; raises calcium hardness; 4, 8, 25 lb
  • Clor Save: granular stabilizer (CYA); 1.75, 4, 7, 25 lb
  • Liquid Clor Save: liquid stabilizer; 1 gallon

Operational and buyer benefits

  • Manufacturer states balanced water "prevents corrosion and staining" and "will also optimize the performance of your sanitizer"

Available models and configurations

Alkalinity UpGranular total alkalinity increaser. Manufacturer says it raises total alkalinity and acts as a buffer to prevent pH bounce, staining, and corrosion.
pH UpGranular pH increaser. Manufacturer says it raises pH with minimal effect on overall alkalinity and reduces eye and nose irritation.
pH DownGranular dry acid pH decreaser. Manufacturer says it lowers pH slowly and effectively, is more convenient than liquid acid, and helps prevent scale build-up.
Calcium ElevatorGranular calcium hardness increaser. Manufacturer says it raises calcium hardness to the recommended level and helps protect surfaces, plumbing, and equipment from corrosive conditions.
Clor SaveGranular chlorine stabilizer. Manufacturer says it raises stabilizer (CYA) to the recommended level, reduces chlorine loss from UV, and dissolves completely when applied as directed.
Liquid Clor SaveLiquid chlorine stabilizer. Manufacturer says it raises stabilizer (CYA) to the recommended level, reduces chlorine loss from sunlight, and rapidly disperses.

Technical specifications

Parameters coveredTotal alkalinity, pH (up/down), calcium hardness, stabilizer (CYA)Source: https://www.ezclorchemicals.com/products/balancers
Manufacturer target ranges (Pool Care Guide)pH 7.4-7.6; free chlorine 2.0-4.0 ppm; total alkalinity 80-120 ppm (marcite/painted/tile/aggregate), 120-140 (vinyl), 70-100 (fiberglass); calcium hardness 250-400 ppm (200-300 vinyl); stabilizer 40-100 ppmSource: https://www.ezclorchemicals.com/pool-care

Specifications are summarized from manufacturer literature and depend on configuration. Confirm current values with FreyTech before design.

Installation requirements and retrofit considerations

Prerequisites

  • Test water before dosing; the manufacturer's Pool Care Guide recommends testing 2-3 times per week

Integration with other equipment

No equipment integrations are documented for this product. Coordination happens through the design team.

FreyTech's role: design, installation, commissioning, training, support

Project services

  • Evaluation of fit for your facility
  • Supply, lead time and pricing confirmed on request
  • Installation and support coordination where the product calls for it

Ongoing service and support

  • Parts, consumables and warranty coordination through FreyTech

Brochures, manuals, warranties and specifications

All resources for E-Z Clor Balancers · Request documents

Related products

See the Specialty Chemicals and Site Disinfection category.

Related solutions: Stabilize water chemistry

Next step

Is E-Z Clor Balancers right for your facility?

Send us your pool volumes, current equipment, and what is not working. A specialist will review fit honestly and recommend next steps.

Serving commercial aquatic facilities across New York State.

Request a Facility AssessmentTalk to a Water-Quality Specialist

Prefer to talk? 1-800-724-2770