Serving commercial aquatic facilities across New York State.
Browse by system
New York requires manual testing of pH and free and total chlorine at the beginning, during, and end of each swimming period with a DPD kit and fresh reagents (10 NYCRR 6-1.11). Automated controllers monitor continuously, but the test kit remains the reference the controller is calibrated against.
FreyTech supplies Taylor Technologies test kits and reagents and trains operators to compare manual results with the controller so probes are calibrated on schedule rather than on failure.
Browse by facility: Municipal · K–12 Schools · Colleges · YMCA / Community · Hospitality · Waterparks · Healthcare · Design teams · Camps / Seasonal
Selection considerations
DPD colorimetric versus FAS-DPD titration; the latter reads high chlorine and combined chlorine more precisely.
New York requires reagents under one year old; plan replacement.
BECSys controllers can upload readings from SpinTouch and Lumiso digital kits.
Featured and available products
Products FreyTech can help you evaluate, and where documented, install and service. Featured items appear first; availability language is shown on each card.
The ChlorKing 5000 Stick Meter is a waterproof handheld tester that reads salt concentration in ppm using a toroidal (inductive) probe, so it does not need the frequent calibration of ordinary conductivity meters.
Request availability
Best fit: Salt level checks on saline chlorinator pools, Verifying salt feeder performance
The ChlorKing 5000 is an inline toroidal salinity controller that continuously displays salt concentration in ppm and water temperature, protecting saline chlorinator cells from running at low salt.
Request availability
Best fit: Continuous salinity monitoring on saline chlorinators, Automatic salt make-up with saturated feeders
ClearAmine is a compact, splash-resistant air-quality monitor for indoor aquatic facilities that continuously estimates trichloramine (NCl3) levels using a surrogate measurement method. Data is processed on the AQUS server and shown in a web app with customizable alerts and optional HVAC control.
Available through FreyTech
Best fit: Municipal indoor pools, Hotel wellness areas and spa facilities, School and university natatoriums
The WaterLink Spin Touch is a photometer that runs a full panel of pool and spa tests from a single sealed SpinDisk reagent cartridge: fill the disk with under 3 mL of sample, insert, and results appear in about 60 seconds.
Request availability
Best fit: Health-department test records, Multi-pool testing routes, Controller verification without reagent handling
The Lumiso Pooltest 3 is a handheld photometer for chlorine, pH and cyanuric acid, packed in a case with reagents and a waterproof reagent box.
Request availability
Best fit: Routine chlorine and pH checks, Cyanuric acid monitoring on outdoor pools
The Lumiso Pooltest 4 adds alkalinity and bromine to chlorine and pH, which makes it a fit for spas and indoor pools where bromine or alkalinity drift is the daily concern.
Request availability
Best fit: Spa and therapy-pool testing, Indoor pool alkalinity and bromine checks
The Lumiso Pooltest 6 covers the six parameters needed for a full water-balance calculation: alkalinity, bromine, calcium hardness, chlorine, cyanuric acid and pH.
Request availability
Best fit: Daily balance testing, Health-department records, Service technician kit
The Lumiso Pooltest Expert is Palintest's benchtop multi-parameter photometer with more than 30 routine and troubleshooting tests, a large touchscreen and IP67 construction.
Request availability
Best fit: High-frequency testing at large facilities, Troubleshooting parameters (metals, phosphate, etc.), Audit-ready records
Commercial 2000-series DPD and FAS-DPD test kits and reagents from Taylor Technologies (Fluidra); 18 Taylor kits are certified to NSF/ANSI/CAN 50 per the manufacturer.
Request availability
Best fit: Daily operator testing, Controller calibration checks
Filter the full library to testing · Manufacturers in this category: ChlorKing, WAPOTECH, LaMotte, Palintest, Taylor Technologies (a Fluidra brand)
FreyTech installation and service
Related system categories
An automated controller is the decision-maker in the equipment room.
Controllers and feeders are only as good as their consumables: probes, flow-cell parts, pump tubes, feeder nozzles, and the chemical itself.
Technical resources
Solutions
Next step
Ask about test kits, reagents, or why your controller and kit disagree.
Serving commercial aquatic facilities across New York State.